|
The 28 papers in this volume were originally presented at the
International Symposium on Adhesion Measurements of Films and
Coatings, held in Boston, December 5-7, 1992. The contributions range
from overview papers to detailed reports of original research activity.
From the Preface: “...Recently I had the occasion to sift the literature and compile the list of
adhesion measurement techniques and, you may believe it or not, the final score came to 355 (quite a
stupendous number), which are listed in the opening paper of this book...[S]ome of these techniques
sound uncouth, primitive and plainly humorous. In spite of this cornucopia of techniques, no single
technique has been acceptable to everyone or applicable to all coatingsubstrate combinations; and
this has been the cause for the proliferation of techniques for adhesion measurement. Also there has
been perennial discordance among the people working in this arena as to what exactly is measured
when someone uses one of these techniques to measure adhesion...”
Target Audience: Researchers, technologists, and students interested in measuring adhesion of
films and coatings.
Partial Table of Contents:
Adhesion Measurement of Films and Coatings: A Commentary
Adherence Failure and Measurement: Some Troubling Questions
Measurement of Adhesion for Thermally Sprayed Materials
Adhesion Measurement of Thin Film Metals by Scratch, Peel and Pull Methods
Adhesion Improvement of RF-Sputtered Alumina Coatings as Determined by the Scratch Test
Scratch Indentation, a Simple Adhesion Test Method for Thin Films on Polymeric Supports
On the Evaluation of Adhesion of Coatings by Automatic Scratch Testing
Micro-Scratch Test for Adhesion Evaluation of Thin Films
Mechanics of the Indentation Test and Its Use to Assess the Adhesion of Polymeric Coatings
Observations and Simple Fracture Mechanics Analysis of Indentation Fracture Delamination of
TiN Films on Silicon
A Study of the Fracture Efficiency Parameter of Blister Tests for Films and Coatings
Adhesion (Fracture Energy) of Electropolymerized Poly(n-octyl maleinide-co-styrene) Coatings
on Copper Substrates Using a Constrained Blister Test
An Experimental Partitioning of the Mechanical Energy Expended During Peel Testing
Comparison of Finite Element Stress Analysis Results with Peel Strength at the
CopperPolyimide Interface
Measurement of the Practical Adhesion of Paint Coatings to Metallic Sheets by the Pull-Off
and Three-Point Flexure Tests
Measurement of the Adhesion of Diamond Films on Tungsten and Correlations with
Processing Parameters
Recent Developments in the Laser Spallation Technique to Measure the Interface Strength and
Its Relationship to Interface Toughness with Applications to Metal/Ceramic, Ceramic/Ceramic
and Ceramic/Polymer Interfaces
Adhesion Studies of Polyimide Films Using a Surface Acoustic Wave Sensor
Testing the Adhesion of Paint Films to Metals by Swelling in N-methyl Pyrrolidone
|